ha8: March 2015

Primitive Modelling - Camera

This is the 3D camera that I made on modeler, added details on the camera like the main front of the camera and also some details at the top.

I used a bevel tool for the front of the camera to make it stick out by making it look like a lens and the top of the camera I used some boxes to make it look like some features of the camera like the buttons and the circle wheel commands where you can change the aspects of the camera.

Box Modelling - Hammer

This is the hammer that I also made on modeler I started off by just a box and expanded it by moving it, expanding it, beveling it and just stretch some of the boxes apart also did some cutting then pulled out to make the handle for the hammer.

Then I added some more detail for it by adding texture on the handle then some color on it to make it look like a proper hammer for the final piece.

Extrusion Modelling - Rifle

Rifle Parts

Modeler

Added details near the end of the gun by adding the grip underneath (moving the grip with the control = 't' ) adjusted to make it right.

I also used the cut tool to adjust the looks for the gun some some are more thin or thicker than some other parts.

For the barrel of the gun I used the bevel ( 'b' ) tool to push and make a whole inside the gun to make it look like more of a gun by adding more detail to the gun and making it stand out.

Reference Modelling - Jet Pack

I started of with the propeller of the jet pack started of with some basic shapes with the cylinder and a tube.

Then afterwards I added a simple shape for the body of the jet pack to get me started off on what it will look like.

Then I did some simple editing on added some aspects of shapes on what the jet pack will look like by beveling some of the shapes.

Then finally I did some finishing touches on the jet pack by making it more detailed also added more aspects on the jet pack like some of the tubes etc..